Delta DRP-24V100W1NN 24V 91W 3.8A DIN Rail CliQ II Series

Download

Datasheet

Uploaded on 02-Jul-2021

Manual

Uploaded on 02-Jul-2021

Image

Uploaded on 05-Jun-2024

Mechanical Drawing

Uploaded on 19-Nov-2020

.DXF

Uploaded on 22-Apr-2020

.STP

Uploaded on 22-Apr-2020

Certificates

Uploaded on 19-Nov-2020

CSA

Uploaded on 26-Nov-2020

EAC

Uploaded on 22-Apr-2020

REACH

Uploaded on 08-May-2024

RoHS

Uploaded on 27-May-2024

SIQ

Uploaded on 19-Nov-2020

TSCA

Uploaded on 15-Nov-2023

UKCA

Uploaded on 02-Jul-2021

Uploaded on 19-Nov-2020

GUI Software

Tech Specs

Output Current

3.8A

Output Voltage

24V

Output Voltage Adjustment Range

22-24Vdc

Output Power

91W

Line Regulation

< 0.5% (@ 85-264Vac input, 100% load)

Load Regulation

< 1.0% at -25°C to +25°C
< 2.0% at +25°C to +50°C
(@ 85-264Vac input, 0-100% load)

PARD

< 150mVpp

Start-up Time

< 2,000ms @ nominal input (100% load)

Hold-up Time

> 20ms @ 115Vac,
> 30ms @ 230Vac (100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 5% @ 85-264Vac input, 0-100% load
(Slew Rate: 0.1A/μs, 50% duty cycle @ 5Hz to 1kHz)

Start-up with Capacitive Loads

8,000μF Max

Rise Time

< 100ms @ nominal input (100% load)

Nominal Input Voltage

100-240Vac

Input Voltage Range

85-264Vac

Nominal Input Frequency

50-60Hz

Input Frequency Range

47-63Hz

DC Input Voltage Range

120-375Vdc

Input Current

< 1.00A @ 115Vac,
< 0.53A @ 230Vac

Efficiency at 100% load

> 88.0% @ 115Vac,
> 89.0% @ 230Vac

Inrush Current

< 30A @ 115Vac,
< 60A @ 230Vac

Power Factor at 100% load

> 0.99 @ 115Vac,
> 0.94 @ 230Vac

Leakage Current

< 0.5mA @ 240Vac

Power Dissipation

0% load: < 0.7W @ 115Vac, < 0.8W @ 230Vac
100% load: < 12.4W @ 115Vac, < 11.2W @ 230Vac

Case Chassis / Cover Aluminium
Indicator Green LED (DC OK)
Cooling System Convection
Input Terminal 3 Pins (Rated 600V/35A)
Output Terminal 4 Pins (Rated 300V/28A)
Signal Terminal -
Noise Sound Pressure Level (SPL) < 40dBA
Input/Output Terminal -
Signal -
Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715
Wire Input / Output: AWG 18-12
Protection Structure -
Terminal -
Unit Weight 0.60 kg (1.32 lb)	Dimensions 124 x 40 x 124 mm 4.88” x 1.57” x 4.88”

Operating Temperature

-25°C to +80°C (Cold Start at -40°C)

Storage Temperature

-40°C to +85°C

Power De-rating

Vertical: > 50°C de-rate power by 2.5% / °C, > 70°C de-rate power by 4% / °C
Horizontal: > 40°C de-rate power by 2.5% / °C

Operating Humidity

5 to 95% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, 30G (300m/S²) for a duration of 18ms, 1 times per direction, 2 times in total

Vibration (Non-Operating)

IEC 60068-2-6, 10Hz to 500Hz @ 30m/S² (3G peak); 60 min per axis for all X, Y, Z direction

Operating Altitude

0 to 2,500 Meters (8,200 ft)

Pollution Degree

Bump Test (Operating)

IEC 60068-2-29, Half Sine Wave: 10G for a duration of 11ms, 1,000 times per direction, 6,000 times in total

Over Voltage Category

III
According to IEC/EN 62477-1 / EN 60204-1 (clearance and creepage distances) and IEC 62103 (safety part)

Overvoltage

< 32V, ±10%, SELV Output, Hiccup Mode, Non-Latching (Auto-Recovery)

Over Temperature

< 80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-Recovery)

Short Circuit

Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)

Degree of Protection

IP20

Protection Against Shock

Class I with Primary Earth connection

Overload

< 100W, Constant Current, Hiccup Mode, Non-Latching (Auto-Recovery)

Overcurrent

< 8A, Constant Current, Hiccup Mode, Non-Latching (Auto-Recovery)

MTBF

> 800,000 hrs. as per Telcordia SR-332 (I/P: 115Vac, O/P: 100% load, Ta: 25°C)

Expected Cap Life Time

10 years (115Vac & 230Vac, 50% load @ 40°C)

Electrical Safety

SIQ Bauart: EN 62368-1
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395), UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)
CB scheme: IEC 60950-1, IEC 62368-1
Limited Power Source (LPS)
UKCA: BS EN 62368-1

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input to Output: 4.0KVac
Input to Ground: 1.5KVac
Output to Ground: 1.5KVac

Industrial Control Equipment

UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)
CSA: CSA to CSA C22.2 No. 107.1-01 (File No. 181564)

Electrical Equipments of Machines

EN/BS EN 60204-1 (over voltage category III)

Electrical Equipment for Use in Electrical Power Installations

EN/BS EN 62477-1 / IEC 62103

Safety Entry Low Voltage

SELV (IEC 60950-1)

UKCA

In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091

Emission

(CE & RE)
Generic Standards: CISPR 32, EN/BS EN 55032, CISPR 11, EN/BS EN 55011, FCC Title 47: Class B

Immunity

Generic Standards: EN/BS EN 55024, EN/BS EN 61000-6-2

Harmonic Current Emissions

IEC/EN/BS EN 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN/BS EN 61000-3-3

Component Power Supply for General Use

EN/BS EN 61204-3

(/3) Item(s) selected

DRP-24V100W1NN

DIN Rail

CliQ II Series

DRP-24V100W1NN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

Unit Weight

Highlights & Features

Tags

Applications

DRP-24V100W1NN

DRP-24V100W1NN

DIN Rail

CliQ II Series

DRP-24V100W1NN

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Tags

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

DRC-48V060W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 52.5 x 55.0 mm

3.44” x 2.07” x 2.17”

DRC-24V030W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 35.0 x 55.0 mm

3.44” x 1.38” x 2.17”

DRC-12V100W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 70 x 55.0 mm

3.44” x 2.76” x 2.17”

DRC-12V030W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 35.0 x 55.0 mm

3.44” x 1.38” x 2.17”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

Download

Supports

Information

Follow us on social

Subscribe to our newsletter