Delta DRM-24V480W1SN 24V 480W 20A DIN Rail CliQ M Series

Download

Datasheet

Uploaded on 28-Feb-2023

Manual

Uploaded on 23-Feb-2023

Image

Uploaded on 05-Jun-2024

Mechanical Drawing

Uploaded on 23-Feb-2023

.DXF

Uploaded on 23-Feb-2023

.STP

Uploaded on 23-Feb-2023

Safety Manual

Uploaded on 23-Feb-2023

Certificates

Uploaded on 28-Feb-2023

REACH

Uploaded on 08-May-2024

RoHS

Uploaded on 27-May-2024

SIQ

Uploaded on 28-Feb-2023

TSCA

Uploaded on 15-Nov-2023

TUV

Uploaded on 28-Feb-2023

UKCA

Uploaded on 28-Feb-2023

GUI Software

Tech Specs

Output Current

20A

Output Voltage

24V

Output Voltage Range

24-28Vdc

Output Voltage Adjustment Range

24-28 Vdc (multi-turn VR)

Output Power

480W

Line Regulation

< 10 mV (@ 85-276 Vac input, 100% load)

Load Regulation

< 4.2% (1 V) @ 85-276 Vac input, 0-100% load)

PARD

< 120 mVpp

Start-up Time

< 1,000 ms @ 100 Vac & 120 Vac & 230 Vac

Hold-up Time

78 ms typ. @ 100 Vac & 120 Vac & 230 Vac (24 V, 10 A)
38 ms typ. @ 100 Vac & 120 Vac & 230 Vac (24 V, 20 A)

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 5% @ 0-100% load
Slew rate 0.1 A/µs (@ 5 Hz, 50 Hz & 1 kHz, 50% Duty Cycle)

Start-up with Capacitive Loads

20,000 µF Max

Rise Time

< 100 ms @ 100 Vac & 120 Vac & 230 Vac

Power Boost Duration

5 seconds typ.
7 seconds max.

Power Boost Recovery Time

17 seconds typ.

Nominal Input Voltage

100-240 Vac

Input Voltage Range

85-276 Vac

Nominal Input Frequency

50-60 Hz

Nominal DC Input Voltage

110-300Vdc

DC Input Voltage Range

88-375 Vdc (Continuously operating)

Input Current

5.19 A typ. @ 100 Vac
4.31 A typ. @ 120 Vac
2.31 A typ. @ 230 Vac

Efficiency at 100% load

92.58% typ. @ 100 Vac
93.23% typ. @ 120 Vac
93.78% typ. @ 230 Vac

Inrush Current

< 13 A @ 100 Vac & 120 Vac & 230 Vac

Power Factor at 100% load

0.99 typ. @ 100 Vac
0.99 typ. @ 120 Vac
0.96 typ. @ 230 Vac

Leakage Current

(Enclosure to Neutral)
< 0.40 mA / 0.40 mA @ 110 Vac, 50 Hz, TN/TT system / IT system
< 0.48 mA / 0.50 mA @ 132 Vac, 50 Hz, TN/TT system / IT system
< 1.10 mA / 1.20 mA @ 264 Vac, 50 Hz, TN/TT system / IT system

Power Dissipation

At 24 V, 0 A:
< 9.00 W @ 100 Vac
< 9.20 W @ 120 Vac
< 10.00 W @ 230 Vac
At 24 V, 20 A:
< 44.00 W @ 100 Vac
< 39.60 W @ 120 Vac
< 33.00 W @ 230 Vac

Case Chassis / Cover Aluminium
Indicator Green LED: DC OK Red LED: Overload
Cooling System Convection
Input Terminal 3 Pins (Rated 600 V / 35 A)
Output Terminal 4 Pins (Rated 300 V / 30 A)
Signal Terminal 2 Pins (Rated 300 V / 28 A)
Noise Sound Pressure Level (SPL) < 25 dBA
Input/Output Terminal -
Signal -
Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715
Wire Input: AWG 18-8 Output: AWG 14-10 Signal: AWG 20-12
Protection Structure -
Terminal -
Unit Weight 1.40 kg (3.09 lb)	Dimensions 124 x 82 x 127 mm 4.88” x 3.23” x 5.00”

Operating Temperature

-25°C to +70°C (Cold start -40°C)

Storage Temperature

-40°C to +85°C

Power De-rating

Vertical Mounting: > 60°C de-rate power by 2.5% / °C
Horizontal Mounting: > 40°C de-rate power by 2.5% / °C

Operating Humidity

5 to 95% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, Half Sine Wave: 30 G for a duration of 18 ms; 3 times per direction, 6 times in total

Vibration (Non-Operating)

IEC 60068-2-6, Sine Wave: 10-500 Hz; 3 G peak; displacement of 0.35 mm; 60 min per axis for all X, Y, Z directions

Operating Altitude

OVC III: 0 to 2,500 Meters (8,200 ft.)
OVC II: 0 to 5,000 Meters (16,400 ft.)

Pollution Degree

Bump Test (Operating)

IEC 60068-2-29, Half Sine Wave: 10 G for a duration of 11 ms, 1,000 times per direction, 6,000 times in total

Over Voltage Category

IEC/EN 62477-1, EN 60204-1, IEC 62103
OVC III: 0 to 2,500 Meters (8,200 ft.)
OVC II: 0 to 5,000 Meters (16,400 ft.)
IEC/EN 60950-1, IEC/EN 62368-1, IEC 61010-1, IEC 61010-2-201
OVC II: 0 to 5,000 Meters (16,400 ft.)

Corrosion

ISA S71.04 G3: Yes

Overvoltage

< 30 V, SELV Output, Latch Mode
The output voltage shall be under 2 V within 1 sec at 50% load

Overload / Overcurrent

> 150% of rated load current, Constant current, Hiccup Mode (Auto-Recovery)

Over Temperature

< 80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-Recovery)

Short Circuit

Hiccup mode, Non-Latching (Auto recovery when the fault is removed)

Degree of Protection

IP20

Protection Against Shock

Class I with Primary Earth connection

Internal Fuse

T 8 A

MTBF

Telcordia SR-332: 864,600 hrs.
I/P: 100 Vac, O/P: 24 V, 20 A, Ta: 25°C

Expected Cap Life Time

131,400 hrs. @ I/P: 100 Vac & 230 Vac, O/P: 24 V, 20 A, Ta: 25°C

Electrical Safety

SIQ Bauart: EN 62386-1
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395), UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)
CB scheme: IEC 60950-1, IEC 62386-1, IEC 61010-1, IEC 61010-2-201

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input / Output: 3.0 kVac
Input / PE: 1.5 kVac
Input / DC OK relay contact: 3.0 kVac
Output / PE: 0.5 kVac
Output / DC OK relay contact: 0.5 kVac
DC OK relay contact / PE: 0.5 kVac

Industrial Control Equipment

UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)

Electrical Equipments of Machines

EN 60204-1 (over voltage category III)

Electrical Equipment for Use in Electrical Power Installations

IEC/EN 62477-1 / IEC 62103

Safety Entry Low Voltage

SELV (IEC 60950-1)

Isolation Resistance

> 5 mOhm (Input to Output, 500 Vdc)

PE Resistance

< 0.1 Ohm

UKCA

In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091

SIL3

IEC 61508, IEC 61511

Component Type: A
PFH [1/h]:
- Single power: 1.18E-09 (Corresponds 1.18% of SIL3)
- Redundant power: 2.36E-09 (Corresponds < 2.36% of SIL3)
PFDavg:
- Single power: 7.60E-05 (Corresponds to 7.60% of SIL3; this value is valid for the stated Proof Test Interval T1)
- Redundant power: 1.52E-04 (Corresponds to 15.2% of SIL3)
SFF: > 60%
T1 (Proof Test Interval): 15 years
HFT: 1

Emission

(CE & RE)
Generic Standards: EN 61000-6-3
CISPR 32, EN 55032, CISPR 11, EN 55011, FCC Title 47: Class B

Immunity

Generic Standards: EN 55024, EN 55035, EN 61000-6-2, EN 61326

Harmonic Current Emissions

IEC/EN 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN 61000-3-3

Component Power Supply for General Use

EN 61204-3

(/3) Item(s) selected

DRM-24V480W1SN

DIN Rail

CliQ M Series

DRM-24V480W1SN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

Unit Weight

Highlights & Features

Applications

DRM-24V480W1SN

DRM-24V480W1SN

DIN Rail

CliQ M Series

DRM-24V480W1SN

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

DRF-48V960W3GBA

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

124 x 110 x 128.7 mm

4.88” x 4.33” x 5.07”

DRC-48V060W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 52.5 x 55.0 mm

3.44” x 2.07” x 2.17”

DRL-15V240W1EN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

123.6 x 40 x 116.8 mm

4.87” x 1.57” x 4.60”

DRC-24V100W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 70 x 55.0 mm

3.44” x 2.76” x 2.17”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

Download

Supports

Information

Follow us on social

Subscribe to our newsletter