CliQ II Redundancy Solutions




Delta Electronics adds two Redundancy Modules, DRR-20A and DRR-40A to its CliQ II series of DIN Rail power management products. They are compatible with both 24Vdc and 48Vdc power supplies, offering redundancy functionality. These modules can also be used for Parallel operation.


The Redundancy function ensures zero system down time for the customer when one of the power supply fails or is being disconnected unexpectedly. Under normal circumstances, both power supplies are each operating at approximately 50% load. When one fails, the other automatically takes over, thus providing 100% load, and ensures that the system continues running


The fault relay function alerts the user of any failure through potential free contacts. The LED lights on the Redundancy Modules also indicate the health of each individual power supply.







How to Install CliQ II 24Vdc Redundancy Module:


Step 1. 

Measure the output voltages at no load from Vin 1 to Com i.e. Voltage Vin 1 to Com and Voltage Vin  2 to Com of Redundancy module. If the voltages are not the same, follow Step 2. If same, skip to Step 3.


Step 2.
Adjust the output voltages, with the help of VR on the Power Supply front panel marked as ADJUST, to the same level. For example, if PSU 1 is measuring 24.15Vdc and PSU 2 is measuring 24.25Vdc, adjust the output voltage of one to be the same as the other.


Step 3.
Connect the PSU to the end system load and measure the output voltages from Vin 1 to Com i.e. Voltage Vin 1 to Com and Voltage Vin 2 to Com of Redundancy module. Ensure that the output voltages are the same even after the 2 Power Supplies are connected to load. If not, adjust them as described in Step 2. A difference of both PSU ± 25mV is acceptable.

*The Redundancy Modules can be used for all PMC 24V, CliQ 24V, CliQ II 24V and 48V models.

For more information or enquiries, please do not hesitate to contact your local Delta Electronics distributor or visit www.DeltaPSU.com.


相关信息

新款 PMH 系列 1U 低外型平板式电源供应器带有 EN 60335 家用电器认证

台达 PMH 系列新增 4 款 1U 低外型平板式电源供应器,提供 100W 及 150W 两种输出功率,匹配全球通用输入电压 85-264Vac 及 -30°C 至 70°C 宽 ...

点击了解详情

台达恒定电流/电压LNE系列LED驱动器新增320W输出功率产品

台达电子恒定电流/电压LNE系列LED 驱动器新增LNE-320W机种,输出电压可选12V、24V、36V及48V。此款单一输出功率驱动器配备多种产品特色组合,适合不同应用及能源优 ...

点击了解详情

台达推出 CliQ III 系列高功率密度导轨型电源专用于严苛工业环境

台达电子新品上架 24V/120W CliQ III 系列导轨型电源供应器,高功率密度,运行温度范围宽可从 -25°C 到 +70°C,全功率运行温度可高达 +60°C,亦可在低至 ...

点击了解详情

订阅电子报

随时掌握活动丶产品的最新资讯

订阅电子报

随时掌握活动丶产品的最新资讯