Delta DRL-24V480W1EN 24V 480W 20A DIN Rail LYTE II Series

Model	Description
DRL-24V480W1ENA	Conformal coating

Model	Description
DRL-24V480W1ENA	Conformal coating

Download

Datasheet

Uploaded on 08-Aug-2024

Manual

Uploaded on 15-Jun-2022

Image

Uploaded on 05-Jun-2024

Mechanical Drawing

Uploaded on 16-Jun-2022

.DXF

Uploaded on 15-Jun-2022

.STP

Uploaded on 15-Jun-2022

Certificates

BIS

Uploaded on 08-Aug-2024

BSMI

Uploaded on 15-Jun-2022

Uploaded on 17-Jan-2023

Uploaded on 15-Jun-2022

EAC

Uploaded on 15-Jun-2022

REACH

Uploaded on 08-May-2024

RoHS

Uploaded on 27-May-2024

TSCA

Uploaded on 15-Nov-2023

TUV

Uploaded on 15-Jun-2022

UKCA

Uploaded on 15-Jun-2022

GUI Software

Tech Specs

Output Current

20A

Output Voltage

24V

Output Voltage Adjustment Range

24-28 Vdc

Output Power

480W

Line Regulation

± 0.5% @ 115 Vac & 230 Vac

Load Regulation

± 0.5%

PARD

< 150 mVpp @ 0°C to +70°C
< 450 mVpp @ -30°C to 0°C

Start-up Time

500 ms typ. @ 115 Vac & 230 Vac (24 V)
800 ms typ. @ 115 Vac & 230 Vac (48 V)

Hold-up Time

25 ms typ. @ 115 Vac & 230 Vac (100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 10% @ 115 Vac & 230 Vac input, 10-100% load (Slew Rate: 2.5 A/μS, 50% duty cycle @ 5 Hz & 10 kHz)

Start-up with Capacitive Loads

8,000 μF Max

Rise Time

30 ms typ. @ 115 Vac & 230Vac

Nominal Input Voltage

100-240 Vac

Input Voltage Range

90-264 Vac

Nominal Input Frequency

50-60 Hz

Input Frequency Range

47-63Hz

Input Current

4.7 A typ. @ 115 Vac, 2.4 A typ. @ 230 Vac

Input Power (Standby Mode)

0.75 W max @ 115 Vac & 230 Vac

Efficiency at 100% load

93.0% typ. @ 230 Vac

Inrush Current

40 A typ. @ 230 Vac

Power Factor at 100% load

> 0.96 @ 115 Vac & > 0.93 @ 230 Vac

Leakage Current

< 1.5 mA @ 240 Vac

Case Chassis / Cover Aluminum
Indicator Green LED DC OK
Cooling System Convection
Input Terminal 3 Pins (Rated 600 V / 30 A)
Output Terminal 4 Pins (Rated 600 V / 30 A)
Signal Terminal -
Noise Sound Pressure Level (SPL) <25 dBA
Input/Output Terminal -
Signal -
Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715
Wire Input: AWG 14-12 Output: AWG 14-12
Protection Structure -
Terminal -
Unit Weight 0.87 kg (1.92 lb)	Dimensions 123.6 x 56 x 116.8 mm 4.87” x 2.20” x 4.60”

Vibration (Operating)

IEC 60068-2-6, Sine Wave: 10 Hz to 500 Hz; 3 G peak; 60 min per axis for all X, Y, Z directions

Shock Test (Operating)

IEC 60068-2-27, Half Sine Wave: 10 G for duration of 11 ms; 1 time in X axis

Operating Temperature

-30°C to +70°C (-40°C Cold Start)

Storage Temperature

-40°C to +85°C

Power De-rating

Temperature:
> 40°C de-rate power by 1.67 % / °C @ 115 Vac
> 50°C de-rate power by 2.5 % / °C @ 230 Vac
Input Voltage
< 100Vac de-rate power by 1% / Vac

Operating Humidity

20 to 90% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, Half Sine Wave: 50 G for duration of 11 ms; 3 times per direction, 9 times in total

Vibration (Non-Operating)

IEC 60068-2-6, Random: 5 Hz to 500 Hz (2.09 G); 20 min per axis for all X, Y, Z direction

Operating Altitude

0 to 5,000 Meters (16,400 ft.)

Pollution Degree

Over Voltage Category

II (Compliance to EN 62477-1 OVC III with 2000 meters altitude)

Overvoltage

<34.0 V, SELV Output, Latch Mode

Overload / Overcurrent

105 - 150% of rated load current, Auto-recovery Continuous current limit Mode (Vo > 80%)

Over Temperature

Latch Mode

Short Circuit

Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)

Protection Against Shock

Class I with Primary Earth connection

Internal Fuse

T10 A / 250 V

MTBF

Telcordia SR-332: > 700,000 hrs
I/P: 115 Vac & 230 Vac, O/P: 100% load, Ta: 25°C

Expected Cap Life Time

10 years (230 Vac, 50% load @ 40°C)

Electrical Safety

CB scheme: IEC 62368-1, IEC 60950-1, IEC 61010-1/-2-201
TUV Bauart: EN 62368-1, EN/BS 61010-1/-2-201
UL/cUL: UL 62368-1, UL 61010-1/-2-201
BSMI: CNS14336-1
EAC: TP TC 004/2011

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input to Output: 3.0 KVac
Input to Ground: 2.0 KVac
Output to Ground: 1.0 KVac

UKCA

In conformance with Electrical Equipment (Safety) Regulations 2016 and Electromagnetic Compatibility Regulations 2016

Emission

(CE & RE)
CISPR 32, EN/BS 55032, EN/BS 61000-6-4, AS/NZS CISPR32, EN/BS EN/BS 61204-3, KS C 9832
Compliance to FCC Title 47, EN/BS 61000-6-3: Class B

Immunity

EN 55035, KS C 9835, EN/BS 61000-6-2, Compliance to EN/BS 61000-6-1

Harmonic Current Emissions

IEC/EN/BS 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN/BS 61000-3-3

Component Power Supply for General Use

EN/BS EN 61204-3

(/3) Item(s) selected

DRL-24V480W1EN

DIN Rail

LYTE II Series

DRL-24V480W1EN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

Unit Weight

Highlights & Features

Applications

DRL-24V480W1EN

DRL-24V480W1EN

DIN Rail

LYTE II Series

DRL-24V480W1EN

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

DRC-24V030W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 35.0 x 55.0 mm

3.44” x 1.38” x 2.17”

DRC-12V030W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 35.0 x 55.0 mm

3.44” x 1.38” x 2.17”

DRL-15V240W1EN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

123.6 x 40 x 116.8 mm

4.87” x 1.57” x 4.60”

DRC-24V060W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 52.5 x 55.0 mm

3.44” x 2.07” x 2.17”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

Download

Supports

Information

Follow us on social

Subscribe to our newsletter