Delta DRP-24V240W2BN 24V 240W 10A DIN Rail CliQ II Series

Download

Datasheet

Uploaded on 06-Oct-2021

Manual

Uploaded on 21-May-2021

Image

Uploaded on 05-Jun-2024

Mechanical Drawing

Uploaded on 26-Nov-2020

.DXF

Uploaded on 22-Apr-2020

.STP

Uploaded on 22-Apr-2020

Certificates

Uploaded on 26-Nov-2020

Uploaded on 19-Sep-2023

CSA

Uploaded on 26-Nov-2020

EAC

Uploaded on 15-Aug-2022

REACH

Uploaded on 08-May-2024

RoHS

Uploaded on 27-May-2024

SIQ

Uploaded on 26-Nov-2020

TSCA

Uploaded on 15-Nov-2023

UKCA

Uploaded on 10-May-2021

Uploaded on 26-Nov-2020

GUI Software

Tech Specs

Output Current

10A

Output Voltage

24V

Output Voltage Adjustment Range

24-28Vdc

Output Power

240W

Line Regulation

< 0.5% (@ 200-550Vac input, 100% load)

Load Regulation

< 1.0% (@ 200-550Vac input, 0-100% load)

PARD

< 150mVpp @ -10°C and above
< 200mVpp @ below -10°C

Start-up Time

< 1,000ms @ nominal input (100% load)

Hold-up Time

> 18ms @ 2 x 230Vac,
> 30ms @ 2 x 400Vac (100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 5% @ 180-550Vac input, 0-100% load
(Slew Rate: 0.1A/μs, 50% duty cycle @ 5Hz)

Start-up with Capacitive Loads

10,000µF Max

Nominal Input Voltage

2 x 200-500Vac (2-Phase)
200-277Vac (Single Phase)

Input Voltage Range

2 x 180-550Vac (2-Phase)
180-305Vac (Single Phase)

Nominal Input Frequency

50-60Hz

Input Frequency Range

47-63Hz

DC Input Voltage Range

254-780Vdc

Input Current

< 2.00A @ 2 x 230Vac,
< 1.00A @ 2 x 400Vac

Efficiency at 100% load

> 90.0% @ 2 x 400Vac

Inrush Current

< 50A @ 2 x 200Vac & 2 x 500Vac

Leakage Current

< 3.5mA @ 500Vac

Power Dissipation

0% load: < 8.5W @ 2 x 200Vac, < 9.5W @ 2 x 500Vac
100% load: < 26.5W @ 2 x 200Vac, < 21.5W @ 2 x 500Vac

Case Chassis / Cover Aluminium
Indicator Green LED (DC OK)
Cooling System Convection
Input Terminal 3 Pins (Rated 600V/35A)
Output Terminal 4 Pins (Rated 300V/28A)
Signal Terminal -
Noise Sound Pressure Level (SPL) < 40dBA
Input/Output Terminal -
Signal -
Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715
Wire Input: AWG 18-8 Output: AWG 16-12 (ensure that all output terminals are connected)
Protection Structure -
Terminal -
Unit Weight 0.81 kg (1.79 lb)	Dimensions 124 x 60 x 117 mm 4.88” x 2.36” x 4.61”

Operating Temperature

-30°C to +70°C

Storage Temperature

-40°C to +85°C

Power De-rating

Vertical: > 50°C de-rate power by 2.25% / °C
Horizontal: > 30°C de-rate power by 2% / °C
Input Voltage: < 200Vac de-rate power by 0.5% / Vac

Operating Humidity

5 to 95% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, 30G (300m/S²) for a duration of 18ms,
1 times per direction, 2 times in total

Vibration (Non-Operating)

IEC 60068-2-6, 10Hz to 500Hz @ 30m/S² (3G peak);
60 min per axis for all X, Y, Z direction

Operating Altitude

0 to 2,500 Meters (8,200 ft.) for ITE application (@ 50°C)
0 to 2,000 Meters (6,560 ft.) for Industrial application (@ 50°C)

Pollution Degree

Bump Test (Operating)

IEC 60068-2-29, Half Sine Wave: 10G for a duration of 11ms, 1,000 times per direction, 6,000 times in total

Over Voltage Category

III
According to IEC/EN 62477-1 / EN 60204-1 (clearance and creepage distances) and IEC 62103 (safety part)

Overvoltage

32V ±10%, SELV Output, Hiccup Mode, Non-Latching (Auto-Recovery)

Overload / Overcurrent

> 120-180% of rated load current, Constant current, Hiccup Mode (Auto-Recovery)

Over Temperature

< 80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-Recovery)

Short Circuit

Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)

Degree of Protection

IP20

Protection Against Shock

Class I with Primary Earth connection

MTBF

> 500,000 hrs. as per Telcordia SR-332 (I/P: 2 x 200Vac & 500Vac, O/P: 100% load, Ta: 25°C)

Expected Cap Life Time

10 years (2 x 200Vac & 500Vac, 50% load @ 40°C)

Electrical Safety

SIQ Bauart: EN 62368-1
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395), UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)
CB scheme: IEC 60950-1, IEC 62368-1
UKCA: BS EN 62368-1

In conformance with EMC Directive 2014/30/EU (only AC input) and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input to Output: 4.0 KVac
Input to Ground: 2.0 KVac
Output to Ground: 1.5 KVac

Industrial Control Equipment

UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)
CSA: CSA C22.2 No. 107.1-01 (File No. 181564)

Electrical Equipments of Machines

EN/BS EN 60204-1 (over voltage category III)

Electrical Equipment for Use in Electrical Power Installations

IEC/EN/BS EN 62477-1 / IEC 62103

Safety Entry Low Voltage

SELV (IEC 60950-1)

UKCA

In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091

Emission

(CE & RE)
Generic Standards: CISPR 32, EN/BS EN 55032, CISPR 11, EN/BS EN 55011, FCC Title 47: Class B

Immunity

Generic Standards: EN/BS EN 55024, EN/BS EN 61000-6-2

Harmonic Current Emissions

IEC/EN/BS EN 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN/BS EN 61000-3-3

Component Power Supply for General Use

EN/BS EN 61204-3

(/3) Item(s) selected

DRP-24V240W2BN

DIN Rail

CliQ II Series

DRP-24V240W2BN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

Unit Weight

Highlights & Features

Tags

Applications

DRP-24V240W2BN

DRP-24V240W2BN

DIN Rail

CliQ II Series

DRP-24V240W2BN

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Tags

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

DRC-48V100W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 70 x 55.0 mm

3.44” x 2.76” x 2.17”

DRC-12V030W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 35.0 x 55.0 mm

3.44” x 1.38” x 2.17”

DRC-24V100W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 70 x 55.0 mm

3.44” x 2.76” x 2.17”

DRC-12V100W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 70 x 55.0 mm

3.44” x 2.76” x 2.17”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

Download

Supports

Information

Follow us on social

Subscribe to our newsletter