IEC 60068-2-6, Sine Wave: 10 Hz to 500 Hz @ 2G ; 10 min per cycle, 60 min for each axis (X,Y,Z)
衝擊測試(運行狀態)
-
運行溫度
-30°C to +70°C ( -40°C Cold Start )
儲存溫度
-40°C to +85°C
功率降額
> 50°C de-rate power by 2% / °C < 100Vac de-rate power by 1% / V (90% load @ 90 Vac)
運行濕度
20 to 90% (Non-Condensing)
衝擊測試(非運行狀態)
IEC 60068-2-27, Half Sine Wave: 50 G for duration of 11 ms; 3 times per direction
振動測試(非運行狀態)
-
儲藏濕度
-
運行高度
0 to 5,000 Meters (0 to 16,400 ft)
污染程度
3
碰撞試驗(運行狀態)
-
過壓類別
II (Compliance to EN 62477-1 OVC III with 2000 meters altitude)
Corrosion
-
衝擊
-
振動
-
噪音
-
過壓保護
26.4 V - 33.6 V SELV Output Latch Mode
超負載/過電保護
105 - 150% of rated load current, Auto-recovery Continuous current limit Mode (Vo > 80%)
過溫保護
Auto-recovery
短路保護
Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)
極性反接保護
-
防護等級
-
電擊防護等級
Class I with Protection Earth connection
輸入端極性保護
-
電池極性保護
-
電池電壓保護錯誤
-
深度放電保護
-
超負載保護
-
過電保護
-
內部保險絲
T10 A / 250 V
Insufficient Input Voltage Protection
-
MTBF
> 700,000 hrs as per Telcordia SR-332 (I/P: 230 Vac, O/P: 100% Load, Ta: 25°C)
預計最長使用壽命
10 years (230 Vac, 50% load @ 40°C)
Safety Certificate
-
電氣安全
TUV Bauart: EN 62368-1, EN 60335-1 UL/cUL: UL 62368-1, and CAN/CSA C22.2 No. 62368-1 CB scheme: IEC 62368-1, IEC 60335-1, IEC/EN 61558-1/-2-16 EAC: TP TC 004/2011 BSMI: CNS 15598-1 CCC: GB4943.1-2022
CE
In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
醫療安全
-
電隔離
Input to Output: 4.0 KVac Input to Ground: 2.0 KVac Output to Ground: 1.25 KVac
工業控制設備
-
危險場所/ATEX
-
II 3 G ATEX 2014/34/EU
-
機器電氣設備
-
用於電率安裝的電氣設備
-
安全特低電壓
SELV
海事
-
材料與部件
-
隔離電阻
-
PE 電阻
-
UKCA
In conformance with Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016
國家地區證書
-
BIS
-
KC
-
Electrical Equipment for Measurement, Control, and Laboratory Use
-
ITE Safety
-
SIL3
-
輻射與傳導
(CE & RE) CISPR 32, EN/BS EN 55032, KS C 9832, AS/NZS CISPR32 & Compliance to FCC Title 47, EN/BS EN 55014-1 , EN/BS 61000-6-3 , EN/BS EN 61000-6-4 : Class B
抗擾度
EN/BS EN 55035, KS C 9835, & Compliance to EN/ BS EN 55014-2 , EN/BS EN 61000-6- 1 , EN/BS EN 61000-6-2