Delta DRV-24V240W1PN 24V 240W 10A DIN Rail CliQ VA Series

Download

Datasheet

Uploaded on 14-Dec-2021

Manual

Uploaded on 15-Jan-2021

Image

Uploaded on 05-Jun-2024

Mechanical Drawing

Uploaded on 22-Apr-2020

.DXF

Uploaded on 22-Apr-2020

.STP

Uploaded on 22-Apr-2020

Certificates

Uploaded on 15-Jan-2021

EAC

Uploaded on 15-Jan-2021

REACH

Uploaded on 08-May-2024

RoHS

Uploaded on 27-May-2024

SIQ

Uploaded on 15-Jan-2021

TSCA

Uploaded on 15-Nov-2023

UKCA

Uploaded on 14-Dec-2021

Uploaded on 15-Jan-2021

GUI Software

Tech Specs

Output Current

10A

Output Voltage

24V

Output Voltage Adjustment Range

24-28Vdc

Output Power

240W

Line Regulation

10mV Max. (@ 85-276Vac input, 100% load)

Load Regulation

100mV Max. (@ 85-276Vac input, 0-100% load)

PARD

50mVpp Max.

Start-up Time

800ms Max. @ 100Vac, 650ms Max. @ 120Vac, 340ms Max. @ 230Vac

Hold-up Time

92ms Typ. @ 100Vac & 120Vac & 230Vac (100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 5% @ 0-100% load
Slew rate 0.1A/µs (@ 5Hz, 50Hz & 1kHz, 50% Duty Cycle)

Start-up with Capacitive Loads

10,000µF Max.

Rise Time

100ms Max. @ 100Vac & 120Vac & 230Vac (0µF, 24V, 10A)
120ms Max. @ 100Vac & 120Vac & 230Vac (10,000µF, 24V, 10A)

Power Boost Duration

5 seconds Typ.
7 seconds Max.

Power Boost Recovery Time

14 seconds Typ.

Nominal Input Voltage

100-240Vac

Input Voltage Range

85-276Vac

Nominal Input Frequency

50-60Hz

Input Frequency Range

47-63Hz

Nominal DC Input Voltage

110-300Vdc

DC Input Voltage Range

88-375Vdc

Input Current

2.63A Typ. @ 100Vac, 2.18A Typ. @ 120Vac, 1.16A Typ. @ 230Vac

Efficiency at 100% load

91.90% Typ. @ 100Vac, 92.72% Typ. @ 120Vac, 94.73% Typ. @ 230Vac

Inrush Current

10.0A Max. @ 100Vac & 120Vac & 230Vac

Power Factor at 100% load

0.99 Typ. @ 100Vac, 0.98 Typ. @ 120Vac, 0.95 Typ. @ 230Vac

Leakage Current

(Enclosure to Neutral)
< 0.28mA / 0.80mA @ 110Vac, 50Hz, TN/TT system / IT system
< 0.38mA / 0.95mA @ 132Vac, 50Hz, TN/TT system / IT system
< 0.74mA / 2.10mA @ 264Vac, 50Hz, TN/TT system / IT system

Power Dissipation

0% load:
2.87W Typ. @ 100Vac, 2.94W Typ. @ 120Vac, 3.00W Typ. @ 230Vac
4.4W Max. @ 100Vac, 4.9W Max. @ 120Vac, 6.1W Max. @ 230Vac

100% load:
21.20W Typ. @ 100Vac, 18.90W Typ. @ 120Vac, 13.39W Typ. @ 230Vac
22.4W Max. @ 100Vac, 19.1W Max. @ 120Vac, 16.7W Max. @ 230Vac

Case Chassis / Cover Aluminium and Plastic / Aluminium
Indicator Green LED (DC OK) and Red LED (Overload)
Cooling System Convection
Input Terminal 3 Pins (Rated 600V/35A)
Output Terminal 6 Pins (Rated 300V/28A)
Signal Terminal 2 Pins (Rated 300V/10A)
Noise Sound Pressure Level (SPL) < 25dBA
Input/Output Terminal -
Signal -
Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715
Wire Input: AWG 18-8 Output: AWG: 18-12 Signal: AWG 20-16
Protection Structure -
Terminal -
Unit Weight 1.02 kg (2.25 lb)	Dimensions 124 x 60 x 139 mm 4.88” x 2.36” x 5.47”

Operating Temperature

-25°C to +70°C

Storage Temperature

-40°C to +85°C

Power De-rating

Vertical Mounting: > 60°C de-rate power by 2.5% / °C
Horizontal Mounting: > 50°C de-rate power by 2.5% / °C

Operating Humidity

5 to 95% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, Half Sine Wave: 30G for a duration of 18ms; 3 times per direction, 6 times in total

Vibration (Non-Operating)

IEC 60068-2-6, Sine Wave: 10-500Hz; 3G peak; displacement of 0.35mm; 60 min per axis for all X, Y, Z directions

Operating Altitude

0 to 5,000 Meters (16,400 ft.)

Pollution Degree

Bump Test (Operating)

IEC 60068-2-29, Half Sine Wave: 10G for a duration of 11ms, 1,000 times per direction, 6,000 times in total

Over Voltage Category

III
According to IEC/EN 62477-1 / EN 60204-1 (clearance and creepage distances) and IEC 62103 (safety part)

Overvoltage

28.8 – 35.2V, SELV Output, Hiccup Mode, Non-Latching (Auto-Recovery)

Overload / Overcurrent

> 150% of rated load current, Constant current limit, Auto- Recovery when the fault is removed

Over Temperature

< 80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-Recovery)

Short Circuit

Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)

Degree of Protection

IP20

Protection Against Shock

Class I with Primary Earth connection

MTBF

1,268,000 hrs. (I/P: 100Vac, O/P: 24V, 10A, Ta: 25°C)
66,600 hrs. (I/P: 100Vac, O/P: 24V, 10A, Ta: 40°C)

Expected Cap Life Time

131,400 hrs. @ 100Vac & 230Vac (O/P: 24V, 10A, Ta: 25°C)
81,490 hrs. @ 100Vac (O/P: 24V, 10A, Ta: 40°C)
121,350 hrs. @ 230Vac (O/P: 24V, 10A, Ta: 40°C)
131,400 hrs. @ 100Vac & 230Vac (O/P: 24V, 5A, Ta: 40°C)

Electrical Safety

SIQ Bauart: EN 62368-1, EN 61010-1, EN 61010-2-201
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395), UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)
CB scheme: IEC 60950-1, IEC 62368-1, IEC 61010-1, IEC 61010-2-201
UKCA: IEC 62368-1, IEC 61010-1, IEC 61010-2-201

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input / Output: 3.0KVac
Input / PE: 2.0KVac
Input / DC OK relay contact: 3.0KVac (Recommend to connect DC OK pins together with output pins)
Output / PE: 1.5KVac
Output / DC OK relay contact: 0.5KVac
DC OK relay contact / PE: 1.5KVac

Industrial Control Equipment

UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)

Electrical Equipments of Machines

EN/BS EN 60204-1 (over voltage category III)

Electrical Equipment for Use in Electrical Power Installations

IEC/EN/BS EN 62477-1 / IEC 62103

Safety Entry Low Voltage

SELV (IEC 60950-1)

Isolation Resistance

> 5 MOhm (Input to Output, 500 Vdc)

PE Resistance

< 0.1 Ohm

UKCA

In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and The Electromagnetic Compatibility Regulations 2016 No. 1091

Emission

(CE & RE)
Generic Standards: EN/BS EN 61000-6-3 CISPR 32, EN/BS EN 55032, CISPR 11, EN/BS EN 55011, FCC Title 47: Class B

Immunity

Generic Standards: EN/BS EN 55024, EN/BS EN 61000-6-2

Harmonic Current Emissions

IEC/EN/BS EN 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN/BS EN 61000-3-3

Component Power Supply for General Use

EN/BS EN 61204-3

(/3) Item(s) selected

DRV-24V240W1PN

DIN Rail

CliQ VA Series

DRV-24V240W1PN

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

Unit Weight

Highlights & Features

Tags

Applications

DRV-24V240W1PN

DRV-24V240W1PN

DIN Rail

CliQ VA Series

DRV-24V240W1PN

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Tags

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

DRC-24V030W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 35.0 x 55.0 mm

3.44” x 1.38” x 2.17”

DRC-48V060W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 52.5 x 55.0 mm

3.44” x 2.07” x 2.17”

DRC-12V060W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 52.5 x 55.0 mm

3.44” x 2.07” x 2.17”

DRC-24V060W1RZ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (H x W x D)

87.5 x 52.5 x 55.0 mm

3.44” x 2.07” x 2.17”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

Download

Supports

Information

Follow us on social

Subscribe to our newsletter