Delta PMT-24V150W2CA 24V 156W 0-6.5A Panel Mount PMT2 Series

Model	Description
PMT-24V150W2CAB	Single side conformal coating

Model	Description
PMT-24V150W2CAB	Single side conformal coating

Download

Datasheet

Uploaded on 02-Apr-2024

Manual

Uploaded on 05-Apr-2024

Image

Uploaded on 06-Jun-2024

Mechanical Drawing

Uploaded on 09-Jun-2021

.DXF

Uploaded on 09-Jun-2021

.STP

Uploaded on 09-Jun-2021

Certificates

BSMI

Uploaded on 09-Jun-2021

Uploaded on 16-Jan-2023

CE & UKCA

Uploaded on 09-Jun-2021

EAC

Uploaded on 09-Jun-2021

REACH

Uploaded on 08-May-2024

RoHS

Uploaded on 27-May-2024

TSCA

Uploaded on 15-Nov-2023

TUV

Uploaded on 09-Jun-2021

GUI Software

Tech Specs

Output Current

0-6.5A

Output Voltage

24V

Output Voltage Adjustment Range

21.6-26.4 Vdc

Output Power

156W

Line Regulation

± 0.5% typ. (@ 115Vac & 230Vac input)

Load Regulation

± 0.5% typ. (@ 115Vac & 230Vac input)

PARD

< 200 mVpp @ 0°C to 70°C,
600 mVpp typ. @ -30°C to 0°C

Start-up Time

500 ms typ. @ 115 Vac & 230 Vac

Hold-up Time

12 ms typ. @ 115 Vac & 55 ms typ. @230 Vac full load

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 10% @ 115 & 230 Vac input, 10-100% load (Slew Rate: 2.5 A/μS, 50% duty cycle @ 5 Hz & 10 KHz)

Start-up with Capacitive Loads

8,000 µF Max

Rise Time

30 ms typ. @ 115 Vac & 230 Vac

Nominal Input Voltage

100-240 Vac

Input Voltage Range

90-264 Vac

Nominal Input Frequency

50-60 Hz

Input Frequency Range

47-63Hz

Input Current

3 A typ. @ 115 Vac, 1.7 A typ. @ 230 Vac

Efficiency at 100% load

90% typ. @230 Vac

Inrush Current

60 A typ. @ 230 Vac

Leakage Current

< 0.5 mA @ 240 Vac / 50 Hz

Case Chassis / Cover Aluminum / SGCC
Indicator Green LED (DC OK)
Cooling System Convection
Input Terminal -
Output Terminal -
Signal Terminal -
Noise Sound Pressure Level (SPL) < 25 dBA
Input/Output Terminal -
Signal -
Mounting Rail -
Wire AWG 18-12
Protection Structure -
Terminal -
Unit Weight 0.392 kg (0.86 lb)	Dimensions 159 x 97 x 30 mm 6.26” x 3.82” x 1.18”

Vibration (Operating)

IEC 60068-2-6, Sine Wave: 20 Hz to 500Hz (5 G); 10 min per cycle, 60min for each axis (X, Y,Z)

Shock Test (Operating)

IEC 60068-2-27, Half Sine Wave: 10 G for a duration of 11 ms, 3 shock for each 3 directions.

Operating Temperature

-30°C to +70°C ( -40°C Cold Start )

Storage Temperature

-40°C to +85°C

Power De-rating

> 50°C de-rate power by 2% / °C

Operating Humidity

20 to 90% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, Half Sine Wave: 50 G for a duration of 11 ms, 3 shocks for each 3 directions

Vibration (Non-Operating)

IEC 60068-2-6, Random: 5 Hz to 500 Hz (2.09 G); 20 min per axis for all X, Y, Z direction

Operating Altitude

0 to 5,000 Meters (0 to 16,400 ft)

Pollution Degree

Over Voltage Category

II (Compliance to EN 62477-1 OVC III with 2000 meters altitude)

Overvoltage

24.6 V - 33.6 V SELV Output, Latch Mode

Overload / Overcurrent

110-175% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery)

Over Temperature

Latch Mode

Short Circuit

Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)

Protection Against Shock

Class I with Protechtion Earth connection

MTBF

> 700,000 hrs as per Telcordia SR-332
I/P: 230Vac, O/P: 100% Load, Ta: 25°C)

Expected Cap Life Time

10 years (230Vac, 50% load @ 40°C)

Electrical Safety

TUV Bauart: EN 62368-1, EN 60335-1, EN 61558-1/-2-16
cULus: UL 62368-1, and CAN/CSA C22.2 No. 62368-1
CB scheme: IEC 62368-1, IEC 60950-1, IEC 60335-1, IEC 61558-1/-2-16
CCC: GB 4943 (design compliance)
KC: K 60950-1
EAC: TP TC 004/2011
BSMI: CNS 14336-1

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

Galvanic Isolation

Input to Output: 4.0 KVac
Input to Ground: 2.0 KVac
Output to Ground: 1.25 KVac

Safety Entry Low Voltage

SELV

UKCA

In conformance with Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016

Emission

(CE & RE)
CISPR 32, EN/ BS EN 55032, EN/ BS EN 61000-6-4, KN 32, AS/NZS CISPR 32 Compliance to EN/BS EN 55014-1, FCC Title 47, EN/ BS EN 61000-6-3 : Class B

Immunity

EN/ BS EN 55035, KN 35, EN/BS EN 61000-6-2 Compliance to EN/BS EN 55014-2, EN/BS EN 61000-6-1

Harmonic Current Emissions

IEC/EN/BS EN 61000-3-2 Class A

(/3) Item(s) selected

PMT-24V150W2CA

Panel Mount

PMT2 Series

PMT-24V150W2CA

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

Unit Weight

Highlights & Features

Applications

PMT-24V150W2CA

PMT-24V150W2CA

Panel Mount

PMT2 Series

PMT-24V150W2CA

Highlights & Features

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions

Unit Weight

Applications

Download

Download

Tech Specs

Tech Specs

Looking for support for this product?

Looking for support for this product?

Related Products

PMR-36V150W1AT

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

129 x 97 x 30 mm

5.08” x 3.82” x 1.18”

PMT-48V50W2BNJ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

99 x 82 x 29 mm

3.90” x 3.23” x 1.14”

PMR-48V150W1AT

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

129 x 97 x 30 mm

5.08” x 3.82” x 1.18”

PMT-48V200W2BNJ

Output Voltage

Output Power

Output Current

Input Voltage Range

Dimensions (L x W x H)

159 x 97 x 30 mm

6.26” x 3.82” x 1.18”

Subscribe to our newsletter

Products

Applications

Selector

News & Events

Download

Supports

Information

Follow us on social

Subscribe to our newsletter